Heavy Duty commercial
Security Back Door
Formidable Security Door Protection

Industry first commercial back door with ultra high security that still meets life safety egress/fire escape building codes.
Proven Protection Against:
- Saw Cut Attacks
- Drill Attacks
- Pry Bar Attacks
- Sledgehammer Attacks
For commercial applications that require the highest security levels
- Uses existing steel door frames
- Uses existing or new alarm connections
- Little aesthetic change,
massive security increase…
Proven Protection by 

Trident lock system included. Fire/egress and life safety compliant.
There are no other commercial back doors on the market as formidable that ALSO meet life safety egress codes. QMI’s patent-pending high security features, PLUS the industry leading Trident 5-point lock system with panic bar release is included-delivering unmatched performance against experienced burglars.
Trident 5-point locking system
- Trident is the Loss Prevention professional’s number one choice in anti-pry door locks.
- Fully surface-mounted hardware allows for retrofit installations into existing steel frames.
- Meets egress compliance for single action door release.
- Two latch-side, two hinge-side bolts, and one center latch surface mounted roller strike project into the frame.
- All 5 lock points release with push of panic bar.
Active Anti-Cut System
- Active anti-cut assemblies located inside door slab (Patent-Pending).
- Prevents electric and gas-powered circular and reciprocating saw attacks.
- Self-healing design stops repeated cuts at the same attack location.
- Enhances door stiffness to resist pry and impact attacks.
Hinge-side protection bracket
- Z-bracket wraps around center-web of door frame to prevent pry-bar from gaining access to door interior.
- Mounting holes slotted for horizontal adjustability during installation .
- Even with exterior hinges cut off, there still is no pry access.
Factory-direct professional installation
- Only factory-trained and certified installers will install a QMI back door for maximum protection.
- Left or right-hand outswing operation.
- Trident lock options: delayed egress alarm, battery operated alarm, exterior manual “break-away” handle, exterior card reader ”break-away” handle, Knox box, and California compliant push paddles.
2-Part interlocking astragal (latch side)
- Astragal profile on door overlaps L shaped angle on frame when door is closed to seal off access to pry-bar attempts at door seam.
Anti-Drill Plates
- Serves as a barrier to steel and carbide drill bits and hole saw attacks.
- High security drill plates are bonded and fastened to the interior door face.
Bellow are examples of ILLEGAL security devices. These not only compromise the employees, but also first responders who might need to use that exit during a fire or other call out. The QMI back door is more secure, yet still safe.

locked bars

frame bolts

padlocks

floor bolts

chains
Egress and Alarm Options:
HEAVY-DUTY COMMERCIAL STEEL SECURITY DOOR – ALARM, EGRESS, & ENTRY OPTIONS
ENTRY OPTIONS:
EXTERIOR HANDLE (MANUAL)
- Stainless Steel Lever body & Mtg. plate
- Break-away lever handle prevents unwanted removal from attacks
- Mortise cylinder by others
EXTERIOR HANDLE (ELECTRIC)
- 24V DC electronic entry controlled by access control system (by others)
- Stainless Steel Lever body & Mtg. plate
- Break-away lever handle prevents unwanted removal from attacks
- Mortise cylinder by others
DELAYED-EGRESS ALARM
- Wall-mounted power supply box with battery back-up
- Wall-mounted alarm box w/ 95 dB alarms
- Mortise cylinder Shunt/Reset
- Alarm box Cover Lock with keys
- Armored Wire-loop transfer from door to alarm (as shown)
- Mortise cylinder by others
- 24V AC Transformer supplied – Wiring by others
Handling Options: (AS VIEWED FROM INSIDE BUILDING)
Cost includes site visit to measure and assess existing door handing and accessories present. For new construction, customer should select the handing and other accessories desired. Freight and tax shall be added as required for each job site.
Doors are built to order, shipped, and then installation is scheduled with the occupant. Installation is typically completed in 4 hours or less during std business hours.
Electrician may be required for certain alarm conditions or door options. (by others)
All doors are for commercial applications with existing steel frames in good condition. Additional T&M may apply if frame requires replacement, strengthening, or concrete installed behind the door frames for necessary structure for a high security door to meet expectations.